Joystick Mounting Kits

$9.00
MJOYMNT5
In stock
+

Joystick "Blind Hole" Mounting kits

No more coach-bolt heads spoiling your panel!
These kits contain inserts which are designed for use in 5/8 or 3/4 inch wood. A hole is drilled in the panel but not all the way through, and then the inserts are wound in using a hex key.
Available in 2 sizes, 6mm suitable for Mag-Stik and 5mm suitable for all other joysticks.
You will need a 1/4 in hex key (6mm) for the large size inserts or a 3/16 in key (5mm) for the small size.

Screw Size:
5mm for all except Mag-Stik